Free Shipping On Orders $75+

Questions? Call or Text +1 (818) 914-4664

Disinfecting Impressions Before They Leave the Office

Dental assistant disinfecting an impression tray before sending it to the lab

My DDS Supply Team |

When a dental office sends an impression, bite registration, or appliance to an off-site laboratory, infection control doesn't stop at the operatory door. The CDC's dental infection control guidelines treat prosthodontic materials as potential vehicles for cross-contamination, and compliance requires a specific cleaning and disinfection step before anything leaves the practice — or returns from the lab.

What the CDC Actually Requires

Dental prostheses, impressions, orthodontic appliances, and other prosthodontic materials such as occlusal rims, temporary prostheses, bite registrations, or extracted teeth should be thoroughly cleaned of blood and bioburden, disinfected with an EPA-registered hospital disinfectant with a tuberculocidal claim, and thoroughly rinsed before being handled in the in-office laboratory or sent to an off-site laboratory. This isn't a suggestion for "extra-cautious" cases — it applies to every case, every time.

The same standard applies in reverse: these items should also be cleaned and disinfected when returned from the dental laboratory and before placement in the patient's mouth. A case that comes back from an outside lab has been handled by technicians and equipment outside your direct infection control oversight, so it needs the same scrutiny before it touches a patient again.

Timing Matters

Disinfection is most effective when performed immediately, before organic material has a chance to dry and harden. Waiting until the end of the day to batch-process impressions allows bioburden to set into the material's surface, making thorough disinfection harder and potentially distorting detail.

Why a Receiving Area Matters for In-House Labs

Practices that run an in-house lab — milling units, model pouring, or orthodontic appliance fabrication — need a defined workflow for incoming cases. In the laboratory, a separate receiving and disinfecting area should be established to reduce contamination in the production area. This keeps clean production benches separate from items that haven't yet been verified as disinfected.

Communication is the piece most offices overlook. If no communication has been received regarding prior cleaning and disinfection of a material, the dental laboratory staff should perform cleaning and disinfection procedures before handling. That means a case sent without documentation effectively forces the lab to disinfect it again, adding time and risk of material damage from a second chemical exposure. A simple note on the lab slip — disinfectant used, contact time, date — closes that gap.

Material-Specific Considerations

Not every impression material tolerates disinfection the same way. Alginate is especially sensitive to prolonged immersion and can distort if soaked too long, while vinyl polysiloxane and polyether are generally more stable under spray or immersion disinfection. Always follow the manufacturer's compatibility guidance alongside the CDC's intermediate-level disinfectant requirement, since dimensional accuracy and infection control have to work together, not against each other.

Building This Into Your SOP

A written protocol should specify: the disinfectant product and dilution used, minimum contact time, where disinfection happens chairside versus in the lab area, and how that information is documented and communicated to outside labs. Auditing this step periodically — the same way you audit sterilization logs — closes a compliance gap that's easy to overlook because it happens outside the operatory.

Frequently Asked Questions

Do impressions really need to be disinfected before going to the lab?

Yes. CDC infection control guidelines call for cleaning, disinfecting, and rinsing all impressions, bite registrations, and appliances before they are handled in-house or sent to an outside laboratory.

What type of disinfectant should be used on dental impressions?

An EPA-registered hospital disinfectant with a tuberculocidal claim (intermediate-level disinfection) is the standard recommendation, followed by a thorough rinse.

Does the lab need to disinfect the case again if the office already did it?

If the office documents and communicates that disinfection was already performed, the lab typically doesn't need to repeat it. Without that communication, lab staff are expected to disinfect the case themselves before handling.

Does disinfection affect impression accuracy?

It can if a material isn't disinfected within manufacturer-recommended contact times, especially alginate, so it's important to match the disinfection method to the specific impression material being used.